Product focus: lighting fixtures EVAC series
The lighting fixtures EVAC series are normally used in those places where an uniform illumination is required. They are used in those areas (group IIC and IIIC) in which, during the normal activities, explosive atmospheres caused by gases, vapours, mists and/or air/dust mixtures are likely to occur.
The lighting fixtures EVAC are made with a low copper content aluminium alloy body and a high mechanical resistance and high temperature transparent borosilicate glass, sealed on the unscrewing part.
They are painted with epoxy powder and they need a protection guard in case of high mechanical risk.
The mechanical robustness and the easy periodic maintenance, limited to the periodic cleaning of the glass globe, make the lighting fixtures of this series the ideal solution for the industrial installations in hazardous areas.
The lighting fixtures EVAC series allow the installation of lamps without ballast, discharge lamps and LED lamps and they can be supplied with fixing kit for wall mounting, ceiling mounting, pole mounting or with adjustable bracket.
|Type of protection||II 2 G Ex d IIC T6…T2 Gb
II 2 D Ex tb IIIC T85°C…T225 °C Db
|Ambient temperature||-60°C;-20°C …+40°C
Only for EVAC 500 LED and EVAC 501 LED 48W-96W
|Conformity||EN 60079-0 : 2012/a11:2013 IEC 60079-0 : 2011
EN 60079-1 : 2007 IEC 60079-1 : 2007
EN 60079-31 : 2014 IEC 60079-31 : 2013
|Degree of protection||IP66|
|Suitable for Zone||1 – 2 (Gas)
21 – 22 (Dust)